 | |  | |  | |  |
water at rates of up to 11.6 gallons in an hour.
This pump utilizes two rollers that squeeze the tubing as they
are rotated, moving the wort or water through the tubing at a
very precise rate.
Since the pumps are so precise, two can be used to pump the
same amount of sparge water and wort, ensuring a consistent
liquid level in the grain bed........THE perfect sparge!
Also, the mechanics of the pump do not contact the liquid. This
will prevent rust, scale, and corrosion from ending up in your
beer! It also ensures a long lasting pump........
The pump comes with a 12 VDC motor without a housing or
power supply. If you would like the pump mounted in a housing
along with a power supply & variable speed control, see the
options below.
Pump without a power supply or housing.
$199 each.
One pump mounted in a plastic enclosure with a variable speed power
supply built in. The speed is changed via a dial mounted on the enclosure.
$279 each.
Two pumps mounted together in one plastic enclosure. The power supply
will feed both pumps (individually adjustable) to ensure they run at the same
rates for a perfect sparge. Twp dials are mounted on the enclosure to
adjust the sparge rate
$449 each.
