Brewery Pump:

Pump Type: Centrifugal

Motor Type: ½ HP TEFC 120V single phase

Flow Rate: 34GPM at 10ft head

Maximum Temp: 220F

Housing Material: Stainless

Impeller Material: Stainless

Connections: Stainless tri-clamp

Comes with 120V plug/cord 20ft.

                        
$740
Sparge Pump:

Peristaltic pump for sparging.  Use one pump for sparging
water on top of the grains and use a second to draw the wort
from the mash tun to the kettle.  The pumps are positive
displacement with a consistent flow rate so the liquid level
above the grain bed remains consistent throughout the sparge
period.  Ideal for 3bbl systems.

Flow rate 2 GPM.

Available in 115V or 24VDC (pump is variable speed when used
with our touch screen / PLC control panel expanding it's use
down to 2bbl).

               115V:
  $650 ea.
Sparge Pump:

Peristaltic pump for sparging.  Use one pump for sparging
water on top of the grains and use a second to draw the wort
from the mash tun to the kettle.  The pumps are positive
displacement with a consistent flow rate so the liquid level
above the grain bed remains consistent throughout the sparge
period.  Ideal for 7bbl systems.

Flow Rate 3.3 GPM.

Voltage 115V

                   
    $1,450 ea.
________________________________________________________________________________________________________________
________________________________________________________________________________________________________________
March 809 Pump with blast cooled motor
(not the standard open exposed coil motor)

0.04HP
7.5GPM
115V

                        
$325
________________________________________________________________________________________________________________
CART PUMPS:

Brewery Pump 3/4HP (Ideal for systems up to 10bbl:

Brewery pump for use with water, wort, beer transfer, etc.  
Ideal for whirl-pooling 3bbl through 7bbl.  Great for use as
a transfer pump from the brewery through the plate chiller to
the fermenter.  Also to be used to transfer between tanks.
Sized for CIP.  55 GPM at 10ft of head.

• Variable speed 3/4 hp centrifugal pump. 120VAC plug w/ 20ft
cord.
• Mounted on a cart with wheels.
• Stainless pump head with 1.5" TC fittings.
• Includes cart, stainless centrifugal pump head with       
1.5" T C fittings
• 3/4HP TEFC motor, and VFD (variable frequency drive)
controller.



                     $1,680 ea.
________________________________________________________________________________________________________________
Brewery Pump 1/2HP (Ideal for systems up to 4bbl):

34 GPM at 10ft of head.

• Variable speed 1/2 hp centrifugal pump. 120VAC plug w/ 20ft
cord.
• Mounted on a cart with wheels.
• Stainless pump head with 1.5" TC fittings.
• Includes cart, stainless centrifugal pump head with       
1.5" T C fittings
• 1/2HP TEFC motor, and VFD (variable frequency drive)
controller.



                   $1,620 ea.