Brew Tanks

We have partnered with Stout Tanks and Kettles located in Portland Oregon to manufacture the tanks for our turn key brewing systems. Stout has added the necessary fittings to match our component connection requirements. All connection points are sanitary tri-clamp fittings. The tanks are drop shipped from Stout's warehouse to the brewery site.

Hot Liquor Tanks:

  • Electric element tri-clamp ports or steam jacketing
  • Insulated & non-insulated available
  • Tangential input is standard on our turnkey systems. This is used to recirculate the water to be sure the temperatures are consistent throughout the tank.
  • Available with a raised HERMS coil.
  • Site Glass
  • CIP Port


Use our Brewery Designer tool to build your turnkey brewery.

When you complete the Brewery Designer, we will ask you for your contact information so a proposal can be e-mailed to you.

Mash Tuns:

  • RIMS / HERMS heated for electric systems or steam jacketed
  • Insulated & non-insulated available
  • Perforated false bottom to 5bbl / wedge wire on larger sizes
  • Available with a rake / plow on sizes larger than 5bbl
  • Grist hydrators available on the larger sizes
  • Circulation ports (double tri-clamps) are standard
  • CIP Port
  • Automated wort grant available


Advanced 7bbl Electric brewery control panel

7bbl open top insulated mash tun

16.7 Gallon automated wort grant

Removable false bottom

RIMS tube attached to mash tun

Brew Kettles:

  • Insulated & non-insulated available
  • Tangential whirlpool port standard
  • Site glass
  • Condensate stack adapter available
  • Condenser available
  • CIP Port

4bbl domed top brew kettle

2bbl Brew Kettle


  • 100% Stainless
  • Sized to match the brewing tanks in your system
  • Rear brackets for mounting the control panel